156 Useful Run Commands

Written by mypchell.com

About a year ago now, I wrote an article on my old site, FixMyXP, called 99 Useful Run Commands. Over the course of the year, this article has brought in an enormous amount of traffic and really put FixMyXP on the map, over 800,000 hits! This article even has been plagerized numerous times (other websites copying and pasting into their websites, and claiming it as their own)...(Continued)

... Because there was so much interest in this topic, I revisited it a few times (raising the total number of Run Commands from 99 to 113). I felt it was time again, to update. I was suprised that I was able to add an addtional 43 more Run Commands, bringing the total to 156! I hope you enjoy!

11/27/05
Added 16 Additional Run Commands
Removed 2 Duplicates.
Total : 113 Run Commands

3/18/06
Added 2 Additional Run Commands
Removed 1 Duplicate.
Total : 114 Run Commands

3/27/06
Added 42 Additional Run Commands,
Total : 156 Run Commands

Do you use the Run feature in Windows XP? For most, this feature remains unused (or rarely used). Why is that? Well, First off nearly all of the Run Commands Correspond to a particular Control Panel Item or a Utility, Tool or Task that can be accessed through Windows. There are, however, tools and utilities that I bet you never knew you had that can be accessed through the Run feature. The main reason most people don't use the Run feature is because they don't know the Commands. So, to solve that problem, I decided to put together the following listing, which lists 99 Run Commands and what they correspond too...

To Access…	Run Command
Accessibility Controls	access.cpl
Accessibility Wizard	accwiz
Add Hardware Wizard	hdwwiz.cpl
Add/Remove Programs	appwiz.cpl
Administrative Tools	control admintools
Adobe Acrobat (if installed)	acrobat
Adobe Designer (if installed)	formdesigner
Adobe Distiller (if installed)	acrodist
Adobe ImageReady (if installed)	imageready
Adobe Photoshop (if installed)	photoshop
Automatic Updates	wuaucpl.cpl
Bluetooth Transfer Wizard	fsquirt
Calculator	calc
Certificate Manager	certmgr.msc
Character Map	charmap
Check Disk Utility	chkdsk
Clipboard Viewer	clipbrd
Command Prompt	cmd
Component Services	dcomcnfg
Computer Management	compmgmt.msc
Control Panel	control
Date and Time Properties	timedate.cpl
DDE Shares	ddeshare
Device Manager	devmgmt.msc
Direct X Control Panel (if installed)*	directx.cpl
Direct X Troubleshooter	dxdiag
Disk Cleanup Utility	cleanmgr
Disk Defragment	dfrg.msc
Disk Management	diskmgmt.msc
Disk Partition Manager	diskpart
Display Properties	control desktop
Display Properties	desk.cpl
Display Properties (w/Appearance Tab Preselected)	control color
Dr. Watson System Troubleshooting Utility	drwtsn32
Driver Verifier Utility	verifier
Event Viewer	eventvwr.msc
Files and Settings Transfer Tool	migwiz
File Signature Verification Tool	sigverif
Findfast	findfast.cpl
Firefox (if installed)	firefox
Folders Properties	folders
Fonts	control fonts
Fonts Folder	fonts
Free Cell Card Game	freecell
Game Controllers	joy.cpl
Group Policy Editor (XP Prof)	gpedit.msc
Hearts Card Game	mshearts
Help and Support	helpctr
HyperTerminal	hypertrm
Iexpress Wizard	iexpress
Indexing Service	ciadv.msc
Internet Connection Wizard	icwconn1
Internet Explorer	iexplore
Internet Properties	inetcpl.cpl
Internet Setup Wizard	inetwiz
IP Configuration (Display Connection Configuration)	ipconfig /all
IP Configuration (Display DNS Cache Contents)	ipconfig /displaydns
IP Configuration (Delete DNS Cache Contents)	ipconfig /flushdns
IP Configuration (Release All Connections)	ipconfig /release
IP Configuration (Renew All Connections)	ipconfig /renew
IP Configuration (Refreshes DHCP & Re-Registers DNS)	ipconfig /registerdns
IP Configuration (Display DHCP Class ID)	ipconfig /showclassid
IP Configuration (Modifies DHCP Class ID)	ipconfig /setclassid
Java Control Panel (if installed)	jpicpl32.cpl
Java Control Panel (if installed)	javaws
Keyboard Properties	control keyboard
Local Security Settings	secpol.msc
Local Users and Groups	lusrmgr.msc
Logs You Out Of Windows	logoff
Malicious Software Removal Tool	mrt
Microsoft Access (if installed)	msaccess
Microsoft Chat	winchat
Microsoft Excel (if installed)	excel
Microsoft Frontpage (if installed)	frontpg
Microsoft Movie Maker	moviemk
Microsoft Paint	mspaint
Microsoft Powerpoint (if installed)	powerpnt
Microsoft Word (if installed)	winword
Microsoft Syncronization Tool	mobsync
Minesweeper Game	winmine
Mouse Properties	control mouse
Mouse Properties	main.cpl
Nero (if installed)	nero
Netmeeting	conf
Network Connections	control netconnections
Network Connections	ncpa.cpl
Network Setup Wizard	netsetup.cpl
Notepad	notepad
Nview Desktop Manager (if installed)	nvtuicpl.cpl
Object Packager	packager
ODBC Data Source Administrator	odbccp32.cpl
On Screen Keyboard	osk
Opens AC3 Filter (if installed)	ac3filter.cpl
Outlook Express	msimn
Paint	pbrush
Password Properties	password.cpl
Performance Monitor	perfmon.msc
Performance Monitor	perfmon
Phone and Modem Options	telephon.cpl
Phone Dialer	dialer
Pinball Game	pinball
Power Configuration	powercfg.cpl
Printers and Faxes	control printers
Printers Folder	printers
Private Character Editor	eudcedit
Quicktime (If Installed)	QuickTime.cpl
Quicktime Player (if installed)	quicktimeplayer
Real Player (if installed)	realplay
Regional Settings	intl.cpl
Registry Editor	regedit
Registry Editor	regedit32
Remote Access Phonebook	rasphone
Remote Desktop	mstsc
Removable Storage	ntmsmgr.msc
Removable Storage Operator Requests	ntmsoprq.msc
Resultant Set of Policy (XP Prof)	rsop.msc
Scanners and Cameras	sticpl.cpl
Scheduled Tasks	control schedtasks
Security Center	wscui.cpl
Services	services.msc
Shared Folders	fsmgmt.msc
Shuts Down Windows	shutdown
Sounds and Audio	mmsys.cpl
Spider Solitare Card Game	spider
SQL Client Configuration	cliconfg
System Configuration Editor	sysedit
System Configuration Utility	msconfig
System File Checker Utility (Scan Immediately)	sfc /scannow
System File Checker Utility (Scan Once At The Next Boot)	sfc /scanonce
System File Checker Utility (Scan On Every Boot)	sfc /scanboot
System File Checker Utility (Return Scan Setting To Default)	sfc /revert
System File Checker Utility (Purge File Cache)	sfc /purgecache
System File Checker Utility (Sets Cache Size to size x)	sfc /cachesize=x
System Information	msinfo32
System Properties	sysdm.cpl
Task Manager	taskmgr
TCP Tester	tcptest
Telnet Client	telnet
Tweak UI (if installed)	tweakui
User Account Management	nusrmgr.cpl
Utility Manager	utilman
Windows Address Book	wab
Windows Address Book Import Utility	wabmig
Windows Backup Utility (if installed)	ntbackup
Windows Explorer	explorer
Windows Firewall	firewall.cpl
Windows Magnifier	magnify
Windows Management Infrastructure	wmimgmt.msc
Windows Media Player	wmplayer
Windows Messenger	msmsgs
Windows Picture Import Wizard (need camera connected)	wiaacmgr
Windows System Security Tool	syskey
Windows Update Launches	wupdmgr
Windows Version (to show which version of windows)	winver
Windows XP Tour Wizard	tourstart
Wordpad	write

Similar articles

Set as favorite

Bookmark

Email This

Comments (122) add comment

Subscribe to this comment's feed

desparatemanagementstudenttolearnadvancedcomputer said:

	this is probably one of the good things posted in the internet. thank you for being one of the nice people. great post! it would be very helpful to me because i really want to learn about the run command. all i know in the run command is the msconfig and the regedit.
	report abuse vote down vote up

June 19, 2008
Votes: +43

YOU ROCK, Lowly rated comment [Show]

GG said:

	Thanks for the good commands it's saving my lot of time. thanks a lot. thanks GG
	report abuse vote down vote up

June 20, 2008
Votes: +6

good, Lowly rated comment [Show]

nuthead said:

	Fantastic!! thanks very much!
	report abuse vote down vote up

June 25, 2008
Votes: +2

JaN... said:

	Thanks, it is the largiest list, which i found about run command. It's allready in my flags. Thanks
	report abuse vote down vote up

June 29, 2008
Votes: +2

U doing a create job..brother!, Lowly rated comment [Show]

Rnifexe said:

	The windows run command is a very useful utility that a lot of people do not appreciate. Sometimes it feels better navigating your computer through keyboard. Makes you like a professional. Thanks for sharing man...
	report abuse vote down vote up

July 02, 2008
Votes: +0

FANTASTIC YAR I CANT THINK RUN COMAD VERY EASILY FOUND., Lowly rated comment [Show]

Rob said:

Thanks for the post! its a goody
the run command will take in switches for a lot of these commands too, like
mstsc /v:host(port) /f (fullscreen) etc, also you can call any program from the run dialog so long as the kernel can find it in the &#xpa;th% (type path in dos or add and environment variable). also if you don't want to remember the full name for the program (any) make a shortcut to it somewhere in the &#xpa;th% and rename it to something else

report abuse

vote down

vote up

July 04, 2008
Votes: -3

44.robot said:

	this list is the s&^t, thank you,not till now have i discovered such a list.
	report abuse vote down vote up

July 04, 2008
Votes: -3

bugnar ciprian said:

	i find this list very useful. i got a problem though: i need to create a timer to run a program periodically, every 20 minutes, because the setting for the program is to stop after 20 minutes of inactivity and the licences to run it once at a time are not to many... can you help?
	report abuse vote down vote up

July 07, 2008
Votes: +1

..., Lowly rated comment [Show]

Aaron said:

	Thanks for this great list of commands! I use Microsoft Access regularly and I noticed one error... Accessibility Controls \| access.cpl Microsoft Access (if installed) \| access.cpl The command access.cpl can only open one program or the other, lol . The actual shortcut for Microsoft Access is mscaccess. Just thought I would pass that along. Thanks again!
	report abuse vote down vote up

July 10, 2008
Votes: +5

thedon said:

	you can add some more run commands 1)microsoft office communicator 2005 - communicator 2)Microsoft Remote Assistance - msra
	report abuse vote down vote up

July 14, 2008
Votes: +6

jimmyc said:

	Awesome list. If you are really into typing commands, check out Slickrun. It lets you basically create your own run commands, you can use it to open up websites (even google searches), directories, unc paths, and basically anything on your computer.
	report abuse vote down vote up

July 18, 2008
Votes: +4

..., Lowly rated comment [Show]

David said:

	Thanks for these; they're very useful. Some of the special folder names can be typed in as run commands - you need to enclose the name in quotes if it has two words. The list is a bit arbitrary; for example, "My Documents" and "Local Settings" work, but not "My Computer" or "My Pictures". There are bound to be others.
	report abuse vote down vote up

July 26, 2008
Votes: +4

Billy said:

	Wicked list, there will come in very handy Cheers
	report abuse vote down vote up

July 28, 2008
Votes: -1

Marius Seven said:

	i think you mean msaccess not mscaccess in order to access ms Access.
	report abuse vote down vote up

July 28, 2008
Votes: +2

Ahamed Mydul Haque Chowdhury said:

	Fantastic! superv!! mind blowing run commands............
	report abuse vote down vote up

July 29, 2008
Votes: +3

goodboy said:

	Great Work, but you have mistakenly repeated some commands. Hope you will correct them and write many other commands. Keep up the good work.
	report abuse vote down vote up

July 30, 2008
Votes: +4

alex san jose said:

	This is a great sites... everything you need about run command is here!..
	report abuse vote down vote up

August 03, 2008
Votes: +0

kamani Rupesh` said:

	hi i m kamani rupesh from rajkot. this is good info. for me . thanks
	report abuse vote down vote up

August 05, 2008
Votes: -3

Administrator said:

	Hi, you're missing - inetmgr (invokes IIS management) - iisreset (stop and start IIS services) in your list. Keep it up.
	report abuse vote down vote up

August 05, 2008
Votes: +10

Sketch said:

	Hi all Can someone help me?? My computer starts a lot of programs when i run windows, i know there is a command so i get in a menu where i can turn those programs off. but i don't know this command :s (sorry for my bad english :p) Jim
	report abuse vote down vote up

August 05, 2008
Votes: +0

harun said:

	thanks
	report abuse vote down vote up

August 05, 2008
Votes: +0

Revathi said:

	Fantastic!!!! very nice!!! It helps lot for me
	report abuse vote down vote up

August 08, 2008
Votes: +0

praful gupta said:

	very good
	report abuse vote down vote up

August 19, 2008
Votes: -3

ndoro said:

	Good man. Coming from unix background, this is really something. you are great. I think if you have ideas like these you should write a book.
	report abuse vote down vote up

August 22, 2008
Votes: +0

sameer said:

i like these commands these command are very useful for hardware person which doesnt know any thing i like this commands very much if you have any more tips for computer basic then plz send it to my id my id is \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it '> This e-mail address is being protected from spambots. You need JavaScript enabled to view it

report abuse

vote down

vote up

August 22, 2008
Votes: +0

pvsp said:

	Wow..mr, you have done a good job..excellent posting
	report abuse vote down vote up

August 25, 2008
Votes: -1

Tel to ask, Lowly rated comment [Show]

yuvaraj said:

	Fantastic!!!! very nice!!! It helps lot for me
	report abuse vote down vote up

August 27, 2008
Votes: -2

Lakku said:

	hey thanks for that man! may be u can add some more commands,plz do it.i know a few of them.have a great day
	report abuse vote down vote up

August 28, 2008
Votes: -2

surenkumar said:

	I very happy for ur work.Thank u very mach..
	report abuse vote down vote up

August 29, 2008
Votes: +0

yogesh mahalle said:

	thax and exlent
	report abuse vote down vote up

August 29, 2008
Votes: -3

sameer said:

	good work..... keep it up
	report abuse vote down vote up

August 30, 2008
Votes: -2

sameer said:

	good work
	report abuse vote down vote up

August 30, 2008 | url
Votes: +0

grigori said:

	to Sketch type the command in run "msconfig"
	report abuse vote down vote up

September 04, 2008
Votes: +0

gee said:

	Is there a way to create a menu that would have all these options so you could run them without typing at the run command. I have created a few of these to run in bat files, so that could be a starting point??? Thanks for any ideas
	report abuse vote down vote up

September 10, 2008
Votes: +0

nice, Lowly rated comment [Show]

o08neo said:

	Great! I searching for this a whole day and finally Thankyou
	report abuse vote down vote up

September 17, 2008
Votes: -2

C D V R said:

	This is a very excellent posting! Keep these comming, not very strong on vista, thank you very much!!!
	report abuse vote down vote up

September 21, 2008
Votes: +0

Suresh Babu said:

	Hi Boss ... Execellent commands......... Kekaooooooooooooo Kekaaaaaaaaaaaaa Very very very Nice ..
	report abuse vote down vote up

September 24, 2008
Votes: -3

Dinakaran said:

	This run command is very usefull and excellent time saver.
	report abuse vote down vote up

September 26, 2008
Votes: -1

Floyd1 said:

	&#xTE;MP% - jumps straight to your temp directory. Plus you can set up your own system variables, wrap them in % signs and explore straight there...
	report abuse vote down vote up

October 03, 2008
Votes: +4

Ramanathan said:

	Thanks a lot... Which iam been searching for a long time..... Thanks a lot.. GOOD work
	report abuse vote down vote up

October 09, 2008
Votes: +0

awer said:

	Fantastic!!!! very nice!!! It helps lot for me wow gold
	report abuse vote down vote up

October 11, 2008
Votes: -2

jeba, Lowly rated comment [Show]

ben3242 said:

	guys i cant find my run i looked everywhere no joke i think its deleted.
	report abuse vote down vote up

October 14, 2008
Votes: +2

Pachaiyappan said:

	Extremely Good !!! Not knew that it has huge list before !!! Information is Wealth. Thanks to MyPCHell.com
	report abuse vote down vote up

October 17, 2008
Votes: -1

Meryl said:

	PREFETCH is also another RUN command used to delete temp. files.
	report abuse vote down vote up

October 23, 2008
Votes: +5

Abhay said:

	were simply gr8
	report abuse vote down vote up

October 23, 2008
Votes: +0

XyCom said:

	Imagine? , Command Galaxy Shell defined / / great insight!!
	report abuse vote down vote up

October 28, 2008
Votes: +0

sakhawath hossain said:

	its absolutely brilliant.using this i can use PC without mouse
	report abuse vote down vote up

October 29, 2008
Votes: -1

gssierra said:

	Hi, How do I look at the programs that are automatically started during my windows start up? using a run command?
	report abuse vote down vote up

October 31, 2008
Votes: +0

Harold said:

	Someone asked for a shortcut command to access a menu to turn off or on programs that startup or run automatically. Try this one, but make sure you know what you are turning off. This is a powerful run command tool: &#xsy;stemroot%system32services.msc /s
	report abuse vote down vote up

November 02, 2008
Votes: -2

Electr0 said:

	What's the command to send a msg to the other pc's in the same LAN? Gr8 list.. keep going
	report abuse vote down vote up

November 02, 2008
Votes: +1

Harold said:

	To access an interactive menu to turn programs off (even those which start automatically) try this powerful shortcut: &#xsy;stemroot%system32services.msc /s
	report abuse vote down vote up

November 02, 2008
Votes: -2

simon said:

	thanx. thats awesome!
	report abuse vote down vote up

November 04, 2008
Votes: -1

hareesh said:

	very nice commands...................
	report abuse vote down vote up

November 11, 2008
Votes: -1

hareesh said:

	super ..........!!!!!!!!!!!!!
	report abuse vote down vote up

November 11, 2008
Votes: +0

Nasir Husain said:

	GREAT!!!! very nice!!! It helps lot for me
	report abuse vote down vote up

November 13, 2008
Votes: -1

Nasir Husain said:

	GREAT!!!! very nice!!! It helps lot for me
	report abuse vote down vote up

November 13, 2008
Votes: -1

k dineshbala said:

	very useful commands. thank u very much.
	report abuse vote down vote up

November 20, 2008
Votes: -1

Aldo said:

	Does anyone have a command similar to "shutdown" but to RESTART Windows??? Thanks in advance for the help.
	report abuse vote down vote up

November 22, 2008
Votes: +0

Cocoflipper said:

	This is fantastic, but I didn't find the command I want. Anyone know the run command for My Documents Properties?
	report abuse vote down vote up

November 25, 2008
Votes: +0

syafiQ Adam said:

	for Sketch: write 'msconfig' in RUN. Under the tab startup, U unmark all the item. This way, your computer can startup faster.
	report abuse vote down vote up

November 26, 2008
Votes: +4

zahid afridi said:

	thanks thanks thanks very very thanks
	report abuse vote down vote up

November 29, 2008
Votes: -1

gopal said:

	very useful run commands
	report abuse vote down vote up

December 10, 2008 | url
Votes: -1

kwatery zakopane said:

	Thanks for sharing!
	report abuse vote down vote up

December 11, 2008
Votes: -2

Prabhu Venkatesh said:

	Great work
	report abuse vote down vote up

December 24, 2008
Votes: -1

Mullaiselvan .M said:

	Good Job!
	report abuse vote down vote up

January 04, 2009
Votes: -1

Shuvankar Maitra said:

	he keeps real intearst in computing.. not like us.... BRAVO
	report abuse vote down vote up

January 10, 2009
Votes: -2

Aung Si (Myanmar) said:

	This is very good for me. thank you very much.
	report abuse vote down vote up

January 15, 2009
Votes: -1

Scott@gm said:

	To use the run command to restart - simply use SHUTDOWN with the -r switch (>shutdown -r)
	report abuse vote down vote up

January 22, 2009
Votes: +2

kernix said:

The run command for Microsoft Access is 'msaccess', not access.cpl - the later opens the Accessibilties folder. Others I found: 'dreamweaver', 'quarkxpress', and 'ds_dual4' - I'm sure you'll recognize the first two; the last one if for my Minolta 35mm film scanner - as a matter fact, try any major program you have loaded on your system (may have to go into the programs main folder to get the exact name.

report abuse

vote down

vote up

February 04, 2009
Votes: +1

chandra said:

	Thank you so much dude!! , great work i have been looking for some thing like this from a long time... appreciate the good work again keep going......
	report abuse vote down vote up

February 05, 2009
Votes: -1

kurdstan_uk said:

	thx very much
	report abuse vote down vote up

February 07, 2009
Votes: -1

M. Faraz said:

	Amazing list here. I was thinking, how about changing it into an RSS feed! That way, I can always have it on my browser/feed viewer instead of having to bookmark it or saving it.
	report abuse vote down vote up

February 16, 2009
Votes: +1

shariq said:

	thank u it gave me very much help
	report abuse vote down vote up

February 28, 2009
Votes: +0

Darth Vader, Lord of the Sith said:

	Impressive, Most Impressive. You have learned much young one. I have a brother on the planet earth who is the day manager of a small supermarket. His name is Chad.
	report abuse vote down vote up

March 02, 2009
Votes: -3

daikin_ph said:

	Thanks for posting this...
	report abuse vote down vote up

March 06, 2009
Votes: -1

ABU BAKAR SIDDIQ said:

	password.cpl is not working.can u plz help me. how to execute this command.
	report abuse vote down vote up

March 08, 2009
Votes: +3

Dave said:

	Hi just come across this site very use full, just one question, could you make it as a download so I could put it on my flash drive for quick reference. Thanks.
	report abuse vote down vote up

April 13, 2009
Votes: +0

Syed said:

	Nice one, thanks. Very helpful for pro guys.
	report abuse vote down vote up

April 13, 2009
Votes: +0

Raju said:

	It is very fentastic commands. Actually I dont know so many commands. Thank you very much
	report abuse vote down vote up

April 17, 2009
Votes: +0

prabakar.s said:

	thanks for all
	report abuse vote down vote up

May 03, 2009
Votes: +0

pda said:

	so so nice
	report abuse vote down vote up

May 11, 2009
Votes: +1

thanuja pathiraja said:

	can u add more ..
	report abuse vote down vote up

May 13, 2009
Votes: -1

abdul said:

	its good but ... users want more...
	report abuse vote down vote up

May 15, 2009
Votes: -1

Pawan said:

	This article is really very helpful. Thanks.By the way what would be the command for recycle bin?
	report abuse vote down vote up

May 20, 2009
Votes: +0

siva said:

	it is very use full for xp users . and it is very good thing . so thanks
	report abuse vote down vote up

May 21, 2009
Votes: +2

paresh thake said:

	I am happy for helf
	report abuse vote down vote up

June 08, 2009
Votes: +1

Md. Rashedul Arifin said:

	Really fantastic
	report abuse vote down vote up

June 19, 2009
Votes: -1

ramin mehri said:

	in the name of GOD very thankyou. goodby.
	report abuse vote down vote up

June 21, 2009
Votes: +1

Nomi Prince said:

	Hey there dear friend ... You done a great and nice job.. Its very useful topic you choose and very inforomative...! Thanx..!
	report abuse vote down vote up

June 24, 2009
Votes: +0

Deems1 said:

	Thanks for the commands man! I love throwing run commands to navigate to certain places where i would normally have to go through a lot of steps to get to. Awesome Page!
	report abuse vote down vote up

June 25, 2009
Votes: +1

archie said:

	hello .... tnx to the information you have given to me....this will be the great help for me to troobleshoot ,repair a pc..... if you want to
	report abuse vote down vote up

June 27, 2009
Votes: +1

Frog said:

	Thanks this list is very useful. Now I do not have to remember the path to the sortcuts for all these programs.
	report abuse vote down vote up

June 27, 2009
Votes: -1

jAyme manuel said:

	thnks a lot!!!! nice commands! now i know what run commands i will use.. thAnks....
	report abuse vote down vote up

June 29, 2009
Votes: +0

jasper said:

	what a nice site, a very angrily encoder very nice site for an small eyes and a far sited person ...thanks to the designer.
	report abuse vote down vote up

June 30, 2009
Votes: +0

RONALDO SINGH said:

	THIS INFORMATION IS VERY USEFULL THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS.
	report abuse vote down vote up

July 09, 2009
Votes: +0

G meher said:

	thank u , give us some more
	report abuse vote down vote up

July 13, 2009
Votes: +0

son of soil said:

	tnaks for ur good and kind act
	report abuse vote down vote up

July 15, 2009
Votes: +2

Dileep Kumar said:

	GREAT!!!! very nice!!! It helps lot for me
	report abuse vote down vote up

July 24, 2009
Votes: +2

Pruthviraj said:

	Super //////// very very thanks for commands. It helps lot for me
	report abuse vote down vote up

July 28, 2009
Votes: +0

Joshua said:

	Jeeeeeeeeeeeeeez! MEN U ARE GREAT. May u be blessed for this. AMEN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
	report abuse vote down vote up

July 28, 2009
Votes: +1

Mahesh said:

	Really very use full stuff... keep it up...
	report abuse vote down vote up

July 30, 2009
Votes: +0

stranger said:

	nice commands
	report abuse vote down vote up

September 16, 2009
Votes: +0

Edward said:

	It is really kind of you for sharing such knowledge for the Windows Users. We all appreciate what you have done.
	report abuse vote down vote up

September 19, 2009
Votes: +0

Clayton Dawson said:

	I have been looking for all of the run commands I could find, then I found this.... it's awesome... Thanks
	report abuse vote down vote up

September 25, 2009
Votes: -1

frost-free said:

	Another one for your list: Active Directory Console - dsa.msc It can be used either in Windows Server or Windows Client (if the adminpak.msi is installed)
	report abuse vote down vote up

October 01, 2009
Votes: +2

timsgolf said:

	password.cpl isn't working on my XP-Pro SP3 machine. Has the program been renamed, moved, or deleted?
	report abuse vote down vote up

October 02, 2009
Votes: +2

Cyril said:

	It is great to have all the commands at one place which i never knew....HOp you will have lot of other datas which can be shared...>Cheeers Mate....
	report abuse vote down vote up